DBM engineers, builds, and designs silage trailers. These dump trailers are specially engineered and designed to fit the customers needs. Current models include the DBM 220HV and the DBM 220S each with there own unique design.
DBM 220S
DBM 220S (load capacity: 20,000kg)
*All given information is only a guideline and subject to change without prior notice!
- 10 cm tapered box of 10ga. steel (700×260/270x180cm new model box, support on 10 deg. angle)
- 50 cm extension height with a mechanical adjust front wall extension.
- Floor of 3/16″ sheet steel.
- Hydraulic lifting tail gate (da) with one grain slide.
- Hydraulic lift cylinder suspended in cardan ring (33 liter).
- Hydraulic drag foot.
- Height adjustable and hydraulic suspended drawbar (170 cm long).
- Heavy swivel pulling eye.
- de Bie heavy rubber mounted swinging tandem with axels 140 mm sq.
- 4 wheels hydraulic breaks.
- Power steer rear axel.
- Hydraulic stabilization on rear axel.
- Chassis of structural channel 12×25.
- Light rear draw hook (double lip).
- Wheels Alliance 750/45-26.5 I-380 (radial).
- Complete with 12V round lights (total 4/red color) and reflectors.
- Sand blasting of box and chassis.
- Urethane paint.
DBM 220HV
DBM 220HV
*All given information is only a guideline and subject to change without prior notice!
- 10 cm tapered box of 10ga. steel
- 50 cm extension height with a mechanical adjust front wall extension.
- Floor of 3/16″ sheet steel.
- Hydraulic lifting tail gate (da) with one grain slide.
- Hydraulic lift cylinder.
- Hydraulic drag foot.
- Height adjustable and hydraulic suspended drawbar (170 cm long).
- Heavy swivel pulling eye.
- 4 wheels hydraulic breaks.
- Power steer rear axel.
- Hydraulic stabilization on rear axel.
- Chassis of structural channel 12×25.
- Light rear draw hook (double lip).
- Complete with 12V lights and reflectors.
- Sand blasting of box and chassis.
- Urethane paint.
